
Resinous systems · polished concrete · moisture mitigation · joint restoration
Industrial floors specified to the slab, priced before the walkthrough
Bodenmuller scopes and delivers turnkey commercial floors for food plants, cold storage, distribution centers and ESD manufacturing — from ASTM F2170 moisture testing and ICRI surface profile to the last foot of integral cove.
Flooring systems
Six systems, each priced and specified on its own page
Installed ranges are turnkey commercial (materials, labor, standard prep) for 2025–2026 US work. Pick by operating environment first, price second.

Urethane Cement
USDA/FSIS washdown, thermal shock −40°F to +250°F, organic acids.
- Installed
- $8–$16+/sf
- Build
- 2mm–3/8 in.
- Return to service
- 24–48 h
- CSI
- 09 67 23

Industrial Epoxy
Dry warehousing, light manufacturing, labs, striped aisles.
- Installed
- $3.50–$12/sf
- Build
- 10–125 mils
- Return to service
- 3–5 days
- CSI
- 09 67 23

MMA Fast-Cure
Freezers down to −20°F and 24/7 plants that cannot stop.
- Installed
- $8–$14/sf
- Build
- 2–4mm
- Return to service
- 2–4 h
- CSI
- 09 67 23

ESD Flooring
ANSI/ESD S20.20 programs: SMT lines, cleanrooms, data halls.
- Installed
- $3–$18/sf
- Build
- thin-film to 4mm SL
- Return to service
- 3–5 days
- CSI
- 09 67 23

Polished Concrete
Distribution centers, high-bay picking aisles, showrooms.
- Installed
- $1.50–$6+/sf
- Build
- Class A–C, 400–3000 grit
- Return to service
- 0–24 h
- CSI
- 03 35 43

Slab Prep & Joint Repair
ICRI CSP 2–5 profiling, polyurea joint fill, spall rebuilds.
- Installed
- $1.50–$45
- Build
- per linear foot
- Return to service
- same shift
- CSI
- 09 05 61.13
Industries served
Two operating realities, two different floors

Food, Beverage & Cold Storage
USDA/FSIS sanitation, steam and hot-oil washdowns, thermal shock at the freezer door, 3/8 in. radius integral cove and slope-to-drain around stainless trench drains. Processing rooms run 1/4–3/8 in. urethane cement; operating freezers take MMA that cures at −20°F.
Food & cold storage floors
Warehousing & Manufacturing
Hard-wheeled forklift traffic, spalled control joints, high-bay light reflectivity, aisle demarcation, chemical zones and ESD segregation. Most distribution floors are best served by 800-grit polished concrete plus ACI 302.1R joint fill; production cells need resin.
Warehouse & plant floorsMoisture risk
Most resinous floor failures start in the slab, not the coating
Standard epoxy typically fails above 75–80% RH (ASTM F2170) or 3 lbs/1,000 sf/24 h MVER (ASTM F1869). Blisters, osmotic delamination and adhesive failure show up months after handover. Test first, then choose: a high-moisture epoxy MVB rated to 99% RH, or a system that tolerates the vapor — 1/4 in. urethane cement or polished concrete.
- 3 + 1 / 1,000 sfASTM F2170 probe count — a 25,000 sf slab needs 27 probes
- $100–$325third-party cost per probe location
- $2.50–$7.50/sfturnkey MVB, large warehouse to small-area minimum
- CSP 3minimum profile under most epoxy MVB primers (ICRI 310.2R)
15-year lifecycle
The cheapest floor on day one is rarely the cheapest by year fifteen
| System | Installed $/sf | Expected life | Return to forklift traffic | Cycles in 15 years |
|---|---|---|---|---|
| Polished concrete (800 grit) | $2.50–$4.00 | 15–20+ yrs | immediate–24 h | re-densify / re-burnish only |
| Thin-mil epoxy (10–20 mil) | $3.50–$6.00 | 5–8 yrs | 3–5 days | 2 recoats |
| High-build epoxy (1/8 in.) | $6.00–$12.00 | 8–12 yrs | 3–5 days | 1 recoat |
| Urethane cement (1/4 in.) | $10.00–$13.00 | 15–20+ yrs | 24–48 h | none expected |
| MMA rapid-cure (2–4mm) | $8.00–$14.00 | 10–20 yrs | 2–4 h | 0–1 topcoat renewal |
Turnkey commercial ranges before moisture mitigation, cove and joint work. How these ranges are built.
Get the slab walked before the budget is locked
Send square footage, facility type, slab condition and your shutdown window. A Bodenmuller estimator reviews the scope, plans ASTM F2170 testing where it is needed and returns a formal proposal.